              Linksys LNE100TX(v5) Fast Ethernet Adapter 
                NetWare 32-bit ODI Driver Installation
              =======================================

                   Copyright (C) 1999-2001 by LinkSys Group Inc.
                        All rights reserved.

NetWare DOS ODI Server Driver Installation (NetWare 4.11)
=========================================================

Requirements:
-------------
        Linksys LNE100TX(v5) Fast Ethernet Adapter Driver Diskette  (LNE100TX.LAN)

Installation Procedure:
-----------------------
1. Insert the Linksys LNE100TX(v5) Fast Ethernet Adapter Driver Diskette into drive A
   and check the contents of subdirectory  \NETWARE\SERVER\NW411
   It should contain the following file:

   LNE100TX.LAN - Novell NetWare V4.11 Server Driver for
               Linksys LNE100TX(v5) Fast Ethernet Adapter
   LNE100TX.LDI - Novell NetWare V4.11 Server Driver Installation
               Information File.
   LNE100TX.INF - Windows 95 ODI driver installation information file

2. At the NetWare prompt (indicated by the Server name),
   run the INSTALL.NLM program by typing:

   server name: LOAD INSTALL <Enter>

3. Select "Maintenance/Selective Install" and press <Enter>.

4. Select "LAN Driver Options (Configure/Load/...)"
   and press <Enter>.

5. Press the <Ins> key to specify other drivers to install.

6. Press <F3> and specify the driver path (A:\NETWARE\SERVER\NW411)
   and press <Enter>.

7. The LNE100TX.LAN driver should appear in your choice list for
   the 'Select a LAN Driver' field. Choose this driver to
   start the driver loading and binding procedure. This
   will allow you to load and bind all 4 frame types supported
   by NetWare.

8. Next time you start up your system, simply follow steps
   2 to 4 to complete the installation.


